www.亚洲天堂,狠狠色综合7777久夜色撩人,极品白嫩少妇无套内谢,国产亚洲精品无码成人www

Derill welcome!/
Products

Alliance guidelines

Online Message

DERILL? ML-A100 Precision bearing oil
DERILL? ML-A100 Precision bearing oil
Product introduction：

ML-A100 precision bearing oil is a high performance powder metallurgy bearing immersion and supplementary lubricating oil .It’s refined by 

synthetic silicone oil  as the base oil,and adding anti - oxygen, anti - wear, corrosion, rust and other additives. Can be used in the immersion and supplementary lubricating of low load powder metallurgy bearings and other applications.It has the following outstanding performances:

Ø Excellent oxidation stability and thermal stability; 

Ø Long service life, to ensure that the product's lifetime lubrication; 

Ø Excellent low temperature performance and high temperature stability, can meet the requirements of wide temperature; 

Ø Biodegradable, environmentally friendly lubricants.

 

 

Typical applications: 

 

Immersion and supplementary lubrication of powder metallurgy bearings with low load and wide temperature range.

 

 

 

 


Online ordering service
The customer respect：
When you select the product, please inform us the full number of sales staff, customer service staff. At the same time, you are welcome to sample color. If the inconvenience, please understand. thank you！
Performance characteristics：

 

1．Very low evaporation loss: the composition of the lubricating oil is reasonable, the light component is small, with a very low evaporation loss, can guarantee the product of long life lubrication. 

2．Excellent high temperature performance: Total Synthesis of silicone oil components to ensure a good high temperature resistance, oxidation resistance, can work stably for a long time at high temperature, reducing sludge and carbon deposit, failure free operation time of bearing. 

3．Excellent low temperature performance, low pour point and composition of synthetic materials, the product can still guarantee normal lubrication at low temperature, to avoid the bad phenomenon of condensation, frozen.

4．High viscosity index: high viscosity index, to ensure that the product can be used in a wide range of temperature, can respond to the outside world temperature change conditions.

5．Low friction coefficient: reduce internal friction, improve the efficiency of sliding lubrication, reduce the loss of energy consumption and the generation of heat.

Good material compatibility: It can be compatible with most of the material around the product，can avoid the compatibility problems such as deformation and crack, but attention should be paid to avoid contact with silicone rubber materials.

 


Index parameter：
Index ML-A100 Test method
Appearance Colorless transparent Visual
Kinematic viscosity(40℃)，mm2/s 76.7 GB/T 265
Kinematic viscosity(100℃)，mm2/s 30.9 GB/T 265
viscosity index 413 GB/T 1995
Dropping point，℃ -52 GB/T 3535
Open flash point，℃ >300 GB/T 3536
density(20℃)，g/cm3 0.92 GB/T 1884
Recommended operating temperature range，℃ -40~220 -

 

 

Filling method：

Clean the lubricating parts,  if immersion lubrication,vacuum filling or other similar filling method can be used;if supplementary lubrication,filling method of automatic oil filling machine can be used.

Storage note：

Please place in a cool, no direct sunlight, no heat source condition, seal containers to prevent pollution after use.

Operational considerations：

This product will stimulate the skin and eyes, the operation should pay attention to take appropriate protective measures. About the use environment,should pay attention to ventilation. Please refer to the material safety data sheet (MSDS) for other safety issues.

Quick Booking
Your online booking: DERILL? ML-A100 Precision bearing oil
Note: with * number is a must
Content：
* Name：
* Company name
Phone：  ｛Format: - telephone area code｝
* Mobile：
* Email：
* Address：
* Code：