ML300-E01 (100#) high temperature chain oil is based on the whole synthetic oil as the base oil, and with anti oxygen, anti wear, corrosion, rust and other additives.It can be used for all kinds of high temperature production line, high temperature conveyor line, coating line and other equipment chain.
Ø Excellent oxidation stability and thermal stability;
Ø Extremely low evaporation loss, low oil consumption, long service life, can effectively reduce the cost of the use of lubricating oil and reduce the cost of processing oil;
Ø Excellent detergency, prevent carbon deposition and coking;
Ø Good wear resistance, effectively ensure the normal lubrication of equipment;
Ø Biodegradable, environmentally friendly lubricants.
Typical applications
v High temperature transport chain system for automobile spraying line and electrophoresis room.
v Plastic film industry, the tensile tensile machine, the textile industry, such as heat setting machine
v Building materials industry, lighting industry, high temperature baking room, high temperature oven, etc.
v Wood floor hot press high temperature chain, heat setting machine high temperature chain, high temperature chain pickling tank.
Ø Excellent lubrication performance: adhesion characteristics of the products with high strength oil film and excellent, can significantly reduce the energy consumption; ensure the formation of lubricating oil film on the surface of continuous contact friction pair, avoid wear contact metal and metal surface in all the actual environment among, prolong the service life of the friction pair.
Ø Excellent high temperature oxidation resistance: This product uses a full synthetic oil as the base oil, with a unique additive, has excellent high temperature oxidation resistance. Can be used at high temperature of 250.
Ø Low friction coefficient: reduce internal friction, improve the efficiency of sliding lubrication, reduce the loss of energy consumption and the generation of heat.
Ø Clean and good performance, no carbon deposition and coking.
Index | ML300-E01(100#) | Test method |
Appearance | Yellow transparent | Visual |
ISO Viscosity grade | 100 | GB/T 3141 |
Kinematic viscosity(40℃),mm2/s | 100.7 | GB/T 265 |
Kinematic viscosity(100℃),mm2/s | 13.17 | GB/T 265 |
Evaporation(100℃,22h),% | 0.14 | GB/T 7325 |
Copper corrosion test (100℃,24h) | Qualified | GB/T 5096 |
Clean the lubricating parts, can use automatic point oil machine and other equipment for filling.
Storage notes:
Please place in a cool, no direct sunlight, non heat source place;After use, seal the container to prevent pollution.
This product may stimulate the skin and eyes;Should pay attention to take appropriate protective measures. The environment should pay attention to ventilation. Please refer to the material safety data sheet (MSDS) for other safety issues.
Address:Room 809, 8 Floor, Qizhengyuan Business Center, No.366 Ainan Road, Longgang District Shenzhen
Hotline:0755-84532807
Phone:(0755)84532807
Fax:(0755)29991061